This curriculum is a model of a specialized training program for JATCs. Curriculum topics include the history and purpose, critical need, complexity and benefits of a mentoring program. The program stresses what is unique about our industry and union membership. This curriculum formalizes a practice that was the basis of the early apprenticeship programs and remains a vital component to the success of our current apprenticeship programs.

This curriculum comes with an Instructor Guide, Mentor Handbook and Mentee Handbook.

• P108 Apprentice Mentoring for the Sheet Metal Industry – Mentee Handbook
• P107 Apprentice Mentoring for the Sheet Metal Industry – Mentor Handbook
• P106 Apprentice Mentoring for the Sheet Metal Industry – Instructor Guide

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The Architectural Sheet Metal curriculum prepares students with an understanding of all architectural principles within large buildings including roof, ventilation, and drainage systems.

This curriculum covers topics such as Roof Systems, Wall Systems, Drainage Systems, Louvers and Ventilators, Supports and Substrates, and Restoration and Finishing. Also covered are specialized techniques specific to the architectural industry: Layout and Fabrication Techniques, Field Installation Techniques, and Safety Procedures.

This curriculum comes with two Student Manuals and four Instructor Guides with DVD support.

• P0101 Architectural Sheet Metal Student Manual, Vol I and II
• P0102 Architectural Sheet Metal Instructor's Guide, Vol I, II, III and IV w/ DVDs

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

Benchmark is the ITI’s next-generation training solution for today’s high tech construction industry. It is three-dimensional, real-time dynamic training software designed to increase productivity and construction coordination. This Building Information Modeling (BIM) software is an add-on to AutoCAD. It is compatible with other BIM software used in the industry such as Navisworks and Revit.

At the end of this course, students should be prepared to take the certification exam in order to become a Certified Benchmark Estimator. This course will provide considerations for configuring Benchmark data on a global level, applying these global configurations to specific projects, and accessing Benchmark data while using AutoCAD.

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

Benchmark is the ITI’s next-generation training solution for today’s high tech construction industry. It is three-dimensional, real-time dynamic training software designed to increase productivity and construction coordination. This Building Information Modeling (BIM) software is an add-on to AutoCAD. It is compatible with other BIM software used in the industry such as Navisworks and Revit.

At the end of this course, students should be prepared to take the certification exam in order to become a Certified Benchmark Estimator. This course will provide considerations for configuring Benchmark data on a global level, applying these global configurations to specific projects, and accessing Benchmark data while using AutoCAD.

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

Benchmark is the ITI’s next-generation training solution for today’s high tech construction industry. It is three-dimensional, real-time dynamic training software designed to increase productivity and construction coordination. This Building Information Modeling (BIM) software is an add-on to AutoCAD. It is compatible with other BIM software used in the industry such as Navisworks and Revit.

At the end of this course, students should be prepared to take the certification exams in order to become Certified Benchmark Fabricators. This course will provide considerations for configuring Benchmark data on a global level and applying these global configurations to specific projects, and for using Benchmark software applications to more efficiently execute the fabrication process. These applications include the Fitting Input tool, Benchmark in the AutoCAD environment, Benchmark Batch Manager in AutoCAD, and Benchmark-FAB.

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

Benchmark is the ITI’s next-generation training solution for today’s high tech construction industry. It is three-dimensional, real-time dynamic training software designed to increase productivity and construction coordination. This Building Information Modeling (BIM) software is an add-on to AutoCAD. It is compatible with other BIM software used in the industry such as Navisworks and Revit.

At the end of this course, students should be prepared to take the certification exams in order to become a Certified Benchmark Field Installer and a Certified Benchmark LBP Installer. This curricula will provide considerations for configuring Benchmark data on a global level, applying these global configurations to specific projects, and using Benchmark to create and manage surveys for individual projects.

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

Benchmark is the ITI’s next-generation training solution for today’s high tech construction industry. It is three-dimensional, real-time dynamic training software designed to increase productivity and construction coordination. This Building Information Modeling (BIM) software is an add-on to AutoCAD. It is compatible with other BIM software used in the industry such as Navisworks and Revit.

At the end of this course, students should be prepared to take the certification exam in order to become a Certified Benchmark Project Manager. This curricula will provide considerations for configuring Benchmark data on a global level and applying these global configurations to specific projects.

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The ITI’s Commercial HVAC curriculum is updated to accurately prepare students for an industry sector that is growing ever more complex. The curriculum provides to students an understanding of the changing dynamics to ensure energy-efficient systems and techniques that can be applied to the installation of new projects and retrofitting current systems.

The curriculum provides students with the HVAC knowledge necessary for their daily tasks and gives them an understanding of Basic Electricity, TAB, Automatic Controls, Field Installation, Heating Basics, Refrigeration Basics, Project Management, Basic Load Calculations, HVAC Safety, and Building Plans and Specifications. This curriculum also comes with DVD support to aid instructors with their presentation of the material.

• P0800 HVAC Student Manual
• P0801 HVAC Instructor’s Guide

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

ITI has created a selection of training materials essential to all sheet metal workers. This set of materials teaches the basics of the trade as well as soft skills needed to be successful in the industry and in life. The new “CORE” Curriculum comes with multiple resources to help students build this strong foundation. The resources include a Core Student Manual, Student Workbook, a Student Self-paced DVD, Instructor Guide with DVD, and Vocational English as a Second Language (VESL) Instructor Supplement. Layout resources are available separately and include a Student Manual, Pocket Guide, and Instructor DVD. A separate Safety Curriculum developed by SMOHIT (Sheet Metal Occupational Health Industry Trust) is also available.

The Core Student Manual has an available self-paced component so students can learn at their own pace. The Layout Student Manual comes with a Pocket Guide for quick reference. As with most ITI curricula, the materials are supported with DVDs to enhance the learning process. These materials may be ordered together or separately.

• P301 CORE Sheet Metal Curriculum – Student Manual w/ Workbook
• P0801 HVAC Instructor’s Guide
• P302 CORE Sheet Metal Curriculum – Instructor Guide w/ DVD
• P303 CORE Sheet Metal Curriculum – Student Self-Paced DVD
• P2201 CORE Sheet Metal Curriculum – VESL Instructor Supplement
• Safety Curriculum DVD (Produced by SMOHIT)

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

A curtain wall is any non-load-bearing exterior wall that hangs from the face of floor slabs. The overall purpose of this course is to provide sheet metal apprentices and journeymen with a basic understanding of the principles of curtain wall systems, as well as the specialized training needed to produce a fully-functional finished project.

This is a 40 hour course of instructor-led training. The skills and knowledge covered in the materials include:

• Introduction to Curtain Wall
• Technical Design Principles
• Manufacturing Process
• Reading Drawings
• Material handling
• Hoisting and Rigging
• Manufacturing Process
• Safety
• Installation
• Project Close-Out

Materials for this course are:

• P351 Curtain Wall Training for Sheet Metal Workers Student Manual
• P350 Curtain Wall Training for Sheet Metal Workers Instructor Guide and Resource Disc

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The Detailing curriculum provides the training materials needed for students to become detailers in our industry. The overall goal of this curriculum is to provide relevant instruction for students to achieve professional certification as detailers. Certification plays a key role for prospective employers who are seeking individuals who know how to use automated processes, as well as any students wishing to attain proficiency in using AutoCAD and Benchmark.

Topics covered in this curriculum include Introduction to Detailing, Computers, Project Correspondence, Job Documents, Coordination, Field Measurement, Take-Off Procedures, Intro to AutoCAD, Advanced AutoCAD, Benchmark, and Advanced Detailing Procedures. This curriculum offers a Student Manual and an Instructor Guide with Resource DVD.

• P0400 Detailing Student Manual
• P0401 Detailing Instructor's Guide w/ Resource DVD

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

DDC modules are designed mainly for TAB and Service Technicians. Each module presents information in a specific area.

The modules presume that the reader has a basic knowledge of HVAC systems and TAB work, and knows how to use the instruments commonly used in the field. Modules in this supplement include: Introduction, Control System Basics, Control Loop, Types of Controllers, Managing the Flow of the Control Agent, Control System Components, Direct Digital Control System Architecture, and DDC Input and Output.

• P0402 Direct Digital Controls

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This book is part of the ITI Environmental Technician Module Series.

These training modules are designed for TAB technicians and other sheet metal workers in HVAC related fields. Each module presents specialized training in a specific area. The modules presume that the reader has a basic knowledge of HVAC systems and TAB work, and knows how to use the instruments commonly used in the field.

These modules include review questions with the answers provided in the back of the book, giving the reader a chance to test mastery of the material.

Topics covered in this supplement include: Leakage Standards, Test Preparations and Procedures, Filling out Reports, Leakage Testing after Building has been in Use, Precautions, Troubleshooting, Finding and Sealing Leaks, and Smoke Testing.

• P0403 Duct Leakage Testing Booklet

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is part of the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians. This particular module covers Basic Operating Principles, Induction Motors, Single-Phase Motors, 3-Phase Motors, Wiring, Replacing Motors, Circuit Protection, Motor Drives, and Calculating Power and Work Along With Basic Operating Motors.

• P0500 Electric Motors & Starters

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is one book in the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians. This particular module covers Basic Electrical Theories, Safety, Circuit Configuration, AC Reactance Effects, Calculations and others aspects of electricity.

• P0501 Electrical Theory Booklet

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This curriculum is designed to familiarize the student with the need and purpose of EUI Audits in the commercial sector as well as provide an understanding of the benefits offered by EUI Audits for cost savings, environmental protection, and national security.

The curriculum guides a student through the process of performing a EUI Audit. Units in this curriculum include:
Introduction, Conducting a EUI Audit, Using the EUI Audit Form, Building Data, Energy Unit Conversions, Energy Utilization Index, Reading Meters, Fuels, and Total Energy Costs. This curriculum comes with a Student Manual and an Instructor’s Resource Disc.

• P507 Energy Audit Manual: Energy Utilization Index (EUI)– Student Manual
• P508 Energy Audit Manual: Energy Utilization Index (EUI)– Instructor Resource Disc

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This curriculum is designed to teach the student how to measure and document the efficiency of a HVAC system. After completing this curriculum, a student should be able to:

• Understand the importance of commercial HVAC energy audits
• Be able to execute the necessary preparatory steps prior to performing the data collection and measurement functions
• Possess the knowledge and skills necessary to competently fill out the various audit forms
• Collect input from onsite personnel
• Collect data from equipment information name plates, manufacturer data sheets, company records, visual inspections, etc.
• Take system performance measurements
• Use all collected data to fill out the final data sheets

This curriculum comes with a Student Manual and an Instructor’s Guide w/ Resource Disc.

• P505 Energy Audit Manual: Total HVAC Systems Audits – Student Manual
• P506 Energy Audit Manual: Total HVAC Systems Audits – Instructor Guide w/ Resource Disc

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This curriculum is designed to teach the student the skills required to serve as a Total Building Energy Audit Technician: gather information about the building through observations and interviews; inspect the building’s exterior envelope; gather information and measure the actual performance of the building’s HVAC systems; and determine other uses of energy within the building.

• P510 Total Building Energy Audit Instructor Guide and DVD
• P509 Total Building Energy Audit Student Manual

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is one book in the ITI Environmental Technician Module Series.

These training modules are designed for TAB and service technicians. This particular module covers Commissioning, Start-Up, TAB, Start-Up and the Technician, Preparation for Start-Up, System Inspection and Documentation Forms for Start-Up.

• P1305 Equipment Start-Up

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is one book in the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians. This module covers: Fan Classifications; Testing & Rating, Fan Laws, Fan and System Curves, System Effects, Fan Selection, Performance Testing, and Troubleshooting.

• P0600 Fans Booklet

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This course introduces methods for firestopping design and installation. Since there is no single solution for firestopping, the need to be able to analyze each building and building component is necessary for creating and designing firestopping.

This course uses information that is available from professional associations and reviews materials used in firestops. It is not intended to be an exhaustive presentation of the profession or to train you to be a contractor responsible for designing firestopping systems.

• P605 Firestopping Student Manual
• P604 Firestopping Instructor Guide

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The overall goal of this course is to provide sheet metal apprentices and journeymen with a basic understanding of the principles of Food Service, as well as a working knowledge of how to use the latest tools and techniques in their jobs. Each setup will present a new challenge in design, fabrication, installation, and testing. In addition, many standards and safety codes need to be implemented into the early stages of design plans and specifications.

• P608 Food Service Training Curriculum Instructor Guide w/DVD
• P609 Food Service Training Curriculum Student Manual

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This supplemental curriculum emphasizes the various responsibilities of a foreman in terms of human relations, communication, planning and organizing, evaluation, and training. Topics in this supplemental curriculum include: Successful Foreman Attributes, Managing and Leading Others, Project Management, Safety Culture, Human Relations, and Professional Development. Other topics covered are the importance of record keeping, the treatment of complaints and disputes, and the principal factors contributing to proper project completion. The Instructor Guide was developed to assist the instructor when teaching the Foreman Training Student Manual. It includes special notes, material and teaching resources, suggested activities, discussion questions, and test items for each unit.

• P0601 Foreman Training Student Manual
• P0602 Foreman Training Instructor Guide

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This curriculum is a technically-specialized instructor-led course on the fundamentals of piping design. Students will learn about the fundamentals of fluid mechanics, how to determine pipe size, the selection of materials, components of a piping system, pipe supports, piping installation techniques, piping expansion effects, thermal insulation, and piping drawings.

This curriculum comes with an instructor guide manual.

• P650 Fundamentals of Piping Design - Instructor Guide and a student with Resource Disc
• P651 Fundamentals of Piping Design - Student Manual

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This supplemental curriculum provides a comprehensive overview of green building topics identified as relevant to the sheet metal industry. More importantly, the intent of this curriculum is to provide an overview of green building. The curriculum highlights aspects of the Leadership in Energy and Environmental Design (LEED®) Green Building Rating System. Topics covered in this curriculum include the following: Sustainability, the USGBC and LEED®, Green Building Strategies, Construction Activity Pollution Prevention (CAPP), Commissioning, Construction Waste Management, Construction Indoor Air Quality, Principles of Energy Conservation, High Performance HVAC Systems, Renewable Energy and more.

Also included in the Student Manual is a self-paced study guide for an individual wishing to prepare for the LEED® Green AP exam.

• P700 Green/LEED® Construction for the Sheet Metal Industry – Student Manual
• P701 Green/LEED® Construction for the Sheet Metal Industry – Instructor Guide w/ Resource Disc

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The objective of this curriculum is to provide a basic understanding and “how to” knowledge of procedures and practices for Heating and Cooling Load Calculations. By the end of the course, you will be able to complete the required steps in heating and cooling load calculations. This includes structure analysis, audits, and calculations to correctly assess the heating and cooling requirements for residential applications.

• P805 Heating & Cooling Load Calculations Student Manual
• P806 Heating & Cooling Load Calculations Instructor Guide

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This curriculum outlines the process and procedures used to effectively clean and restore HVAC systems and associated air distribution pathways. It provides the knowledge base of necessary skills, technical processes and safety procedures required at each stage of a typical HVAC cleaning and restoration project. This course should help to prepare a student for any third party certification offered on duct cleaning.

This curriculum comes with an instructor guide and a student manual.

• P808 HVAC Systems Cleaning & Restoration – Student Manual
• P809 HVAC Systems Cleaning & Restoration – Instructor Guide w/Resource Disc

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This book is in the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians. Each module presents specialized training in a specific area. The modules presume that the reader has a basic knowledge of HVAC systems and TAB work, and knows how to use the instruments commonly used in the field.

This module covers the History of IAQ, How to Identify IAQ Problems, Causes of IAQ Problems, and Methods to Correct Problems Related to Poor IAQ.

• P0901 Indoor Air Quality

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The Industrial Sheet Metal and Welding curriculum covers the wide range of skills required in the Industrial/Welding industry. This curriculum is packaged with the entire ITI Welding curriculum, although the Welding curriculum may be ordered separately in order to supplement other career path curricula.

The Industrial/Welding curriculum covers topics that include industrial-specific Safety, Materials, Weld Symbols, Pipe Welding, Grinding and Finishing Stainless Steel, System Design Basics, Shop Skills, Field Skills, and Hoisting and Rigging.

The Welding curriculum covers Oxyfuel Cutting, Plasma Cutting, CAW, SMAW, GMAW, FCAW, GTAW, GMAW-Pulse, GTAW-Pulse, Electrical Fundamentals, and Basic Metallurgy. All curriculums come with DVD support (which includes graphics, animations, and instructional videos) for the instructor.

• P0903 Industrial Student Manual with Workbook
• P0904 Industrial Instructor Guide with DVD
• P2300 Welding Student Manual
• P2301 Welding 1 Instructor’s Guide with DVD
• P2302 Welding 2 Instructor’s Guide with DVD
• P2303 Welding 3 Instructor’s Guide with DVD
• P2304 Welding 4 Instructor’s Guide with DVD

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The purpose of this course is to provide the background knowledge essential to understanding the effective operation of laboratory fume hoods and the means for measuring their performance according to ANSI/ASHRAE standard 110-1995 Method of Testing Performance of Laboratory Fume Hoods. This course is NOT designed to:

• Teach students to conduct a laboratory fume hood test according to any other standard
• Provide expertise in determining if a fume hood is operating properly
• Enable you to conduct an engineering investigation why a laboratory fume hood may have failed the ANSI/ASHRAE standard
• Provide knowledge of how to improve the performance of a laboratory fume hood

This is a 40-hour course. The skills and knowledge covered in the enclosed materials include:

• Introduction to Laboratory Fume Hoods
• How Fume Hoods Work
• Fume Hood Styles
• Test Equipment
• Fume Hood Performance Tests

Materials for this course are:

• Laboratory Fume Hood Performance Testing for Sheet Metal Workers Student Manual
• Laboratory Fume Hood Performance Testing for Sheet Metal Workers Instructor Guide and Resource Disc

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This new, comprehensive and stand-alone Layout Curriculum was previously included in the CORE Curriculum. It is designed to introduce apprentices to the essentials of layout and pattern development, which is the bridge between the mental visualization of an object and its actual fabrication. From rudimentary hand drawings to the most sophisticated CAD technology, it applies the basic principles of geometry to the broad range of objects workers are likely to encounter in their careers as sheet metal craftsmen.

This curriculum contains the following modules: Introduction to Layout, Foundational Layout Functions, Principles of Pattern Development, and Shapes, Materials & Shortcuts.

The Layout Curriculum includes a Student Manual and Pocket Guide. The interactive Instructor DVD is designed to help instructors present the material for students to easily understand.

• P1202 Layout Curriculum – Student Manual w/Pocket Guide
• P1203 Layout Curriculum – Instructor DVD
• P1204 Layout Curriculum – Student Pocket Book Only

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This supplemental curriculum is designed to provide sheet metal workers with a basic understanding of the principles of Lean Construction and a working knowledge of how to use Lean Construction tools and techniques to increase efficiency on the job.

Modules in this curriculum include Identifying the Problem, Adding Value with Lean, Organizing the Workplace, Lean Tools and Techniques on the Job, and Being Part of a Winning Team.

• P1200 Lean Construction Student Manual
• P1201 Lean Construction Instructor Guide

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This supplemental curriculum teaches the math skills required in the sheet metal industry. The curriculum contains a Student Manual and Workbook as well as an Instructor’s Guide with DVD support.

Topics covered in this curriculum include an Introduction to Sheet Metal Math; a Basic Math Drill for Students; Working with Equations, Shapes, Lines and Angles, Perimeters, Areas, Volumes, Ratios and Proportions; Right Triangles; Rectangular and Polar Coordinates; Irregular Triangles; and Shear Lists. Students also learn how to input math formulas into Microsoft Excel.

• P1306 Sheet Metal Math Student Manual and Workbook
• P1307 Sheet Metal Math Instructor’s Guide w/ DVD

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is part of the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians. This particular module covers Hydronic Systems, Piping System Components, Piping Arrangements, Steam Heating Systems, and Balancing Instruments Used on Hydronic Systems.

• PP1600 Piping Systems Booklet

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This supplemental curriculum covers material and skills that a Project Manager needs in order to complete a successful project.
Units include: The Project Manager, Construction Documents, Controlling Costs, Preparing for the Project, Schedules & Meetings, Paperwork, Quality Control & Productivity, Tools, Equipment & Materials, Legal Considerations, and Completing the Project.

The Instructor Manual was developed to assist the instructor when teaching the Project Management textbook. It includes Special Notes, Material & Teaching Resources, Suggested Activities, Discussion Questions, Review Items, Quizzes, and Test Items for each unit in the Project Management textbook.

• P1602 Project Management Student Textbook
• P1601 Project Management Instructor’s Manual

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is one book in the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians and other sheet metal workers in related fields. This particular module covers Properties of Moist Air, Using a Psychrometric Chart to Calculate Air Properties, Understanding the Principles of Heat Content of Moist Air, and Performing Heat Transfer and Load Calculations, Using Psychrometric Calculations to Perform TAB Tasks, and Analyzing the Relationship Between the Psychrometric Properties and Environmental Conditions, Comfort, and Energy.

• P1603 Psychrometrics

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is part of the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians and other sheet metal workers in related fields. This module covers Hydronic System Components, Pump Types, Pump Laws and Equations, Pump and System Curves, and Pressure Relationships.

• P1604 Pumps

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This supplemental curriculum is designed to teach the student how to use various types of plans, job specifications, and other related contract documents. It also includes shop-drawing exercises for the student. This curriculum follows the "New" CSI Master format which is making its way into the construction industry.

The Student Textbook is designed to be used in conjunction with the Plans & Specifications Selected Specifications & Submittals Manual, and the Plans & Specifications Selected Drawings.

The Instructor Manual is designed to be used in conjunction with the Plans & Specifications Selected Textbook, the Specifications & Submittals Manual, the Plans & Specifications Selected Drawings, and the Plans CD that contains a full set of drawings in AutoCAD format, a full set of Specifications & Submittals and over 300 photos of two construction projects.

The manual includes special notes, material and teaching resources, suggestions for lesson plans, and work exercise answers.

• P1808 Reading Plans & Specs – Instructor Guide
• P1809 Reading Plans & Specs – Student Manual
• P1811 Reading Plans & Specs – Selected Specs and Submittals
• P1812 Reading Plans & Specs – Selected Drawings (Plans)

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.

This curriculum is designed to teach the student how to use various types of plans, job specifications, and other related contract documents. It also includes shop-drawing exercises for the student. This curriculum follows the “Old” CSI Master format which is still prevalent in the construction industry.

The student textbook is designed to be used in conjunction with the Plans & Specifications Selected Specifications & Submittals Manual, and the Plans & Specifications Selected Drawings.

The Instructor Manual is designed to be used in conjunction with the Plans & Specifications Selected Textbook, the Specifications & Submittals manual, the Plans & Specifications Selected Drawings, and the Plans CD that contains a full set of drawings in AutoCAD format, a full set of Specifications & Submittals, and over 300 photos of two construction projects.

The manual includes special notes, material and teaching resources, suggestions for lesson plans, and work exercise answers.

• P1800 Reading Plans & Specs – Selected Specs and Submittals
• P1801 Reading Plans & Specs – Student Textbook
• P1802 Reading Plans & Specs – Instructor’s Manual
• P1806 Reading Plans & Specs – Selected Drawings (Plans)

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.

This curriculum is designed to provide the student with the basic procedures and guidelines for installing architectural sheet metal and roofing on residential buildings. This curriculum has a student manual as well as an instructor guide with a resource disc.

• P104 Residential Architectural Sheet Metal & Roofing – Student Manual
• P105 Residential Architectural Sheet Metal & Roofing – Instructor Guide w/ Resource Disc

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The ITI Residential HVAC curriculum prepares students for all aspects of Residential HVAC work. The curriculum is broken into four distinct books and each book focuses on a specific area of the Residential HVAC industry: New Construction Installer, Finish Installer, Retrofit Technician, and Service Technician. Each book comes with a workbook with practice exercises. A student has the choice to learn a specific area or may choose to learn all aspects of the industry. The books can only be ordered as a complete set.

• P1803 Residential Student Manuals and Workbooks
• P1804 Residential Instructor's Guides

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

To become a qualified roofing technician requires a full understanding of the various roof and drainage systems, the techniques and materials needed to apply and install built-up and single-ply roofing, and - most importantly – knowing the right safety protocols, and how to avoid and troubleshoot hazards on the job.

The ITI Roofing curriculum stresses safety, along with all the vital components of roofing. This curriculum is divided into separate books with each covering specific topics. The different books include Common Roofing Topics, Built-Up Roof Membranes, Built-Up Roofing, Decks, Insulation and Drains, Hazards in Commercial Roofing, Modified Bitumen Roof Membranes, Preparing the Deck, Repair and Re-Roof, Single-Ply Membrane Flashing, Single-Ply Roof Membranes, and Single-Ply Roofing. Each student manual comes with a self-paced instructional DVD to assist with the unit instruction. The books can only be ordered as a complete set.

• P1815 Roofing Instructor Manuals
• P1821 Roofing Student Reference Manuals

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

The Service and Refrigeration curriculum is an intense multi-year training course necessary for all refrigeration and air conditioning technicians to become proficient in servicing, installing and maintaining large-scale HVAC systems.

The ITI’s curriculum utilizes the Refrigeration and Air Conditioning Technology curriculum published by Cengage Learning. This curriculum is considered the industry leader in service and refrigeration. To supplement this curriculum, the ITI has developed a Service Lab Manual that includes numerous projects specific to the sheet metal industry that JATCs may implement as part of their service-training program.

• P1813 Refrigeration and Air Conditioning Technologies Custom Edition Instructor Guide
• P1814 Refrigeration and Air Conditioning Technologies Custom Edition Student Guide
• P1944 Service Work Lab Manual

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This supplemental curriculum is focused on the information that one should know before starting a business in the sheet metal industry. The curriculum covers topics such as creating a business plan, risks and rewards of going into business, knowing true costs for a company, utilizing professionals (accountants, lawyers, etc.), and reading contract documents. This curriculum also has a self-evaluation tool for an individual who is thinking of going into business.

• P202 Sheet Metal Business 101 Student Manual
• P203 Sheet Metal Business 101 Instructor Guide

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.

The Sign Industry Curriculum covers techniques and procedures that pertain to the fabrication and installation of signs. This unique industry requires a specific set of technical skills that are taught in curriculum.

Areas of instruction include: Safety, Tools and Equipment, Materials, Drafting, Computers, Basic Layout, Letters, Soldering and Welding, and Installation.

• P2003 Sign Industry Student Textbook with Workbook
• P2004 Sign Industry Workbook Only
• P2002 Sign Industry Instructor’s Guide

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.

This supplemental curriculum covers the skills, techniques, and materials required to become proficient at soldering. The modules cover both Basic and Advanced soldering Techniques, Equipment, Types of Solder and Fluxes, as well as Soldering on Various Materials. This curriculum includes a student manual, instructor guide with DVD support, a soldering pocket guide, and a self-paced DVD for students to use outside of the classroom.

• P1938 Soldering Pocket Guide (Only)
• P1939 Soldering Student Manual with Pocket Guide
• P1940 Soldering Instructor Manual
• P1941 Soldering Self-Paced DVD

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.

This module is one book in the ITI Environmental Technician Module Series.

These training modules are for TAB and Service technicians and other sheet metal workers in related fields. This particular module covers basic theories of sound and vibration, along with measuring, analyzing, and corrective techniques.

• P1930 Sound & Vibration Technology Booklet

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.

This supplemental curriculum covers the skills needed for someone in a supervising position to be successful as a shop or team leader.

The supervisor is someone who oversees project managers, yet answers to top-level management. Topics covered include Leadership and Motivation, Communications Skills, Contract Administration, Project Organization, Project Administration and Supervision, and Managing Productivity and Profitability.

• P1943 Supervisory Training Program Participant Manual
• P1942 Supervisory Training Program Instructor Manual

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.

A building’s operations depend on accurate Testing, Adjusting & Balancing (TAB) to maintain safety and efficiency. The ITI’s TAB Curriculum covers both the air and hydronic sides of balancing. An intense curriculum reinforces the demanding job of being a TAB professional.

The combination of technical skills and proper measuring, troubleshooting and theoretical knowledge is taught. Besides the fundamentals of HVAC, electrical systems, and air flow, TAB students must also fully understand operations of hydronic systems, along with pumps, pipes, motors and fans.

This curriculum will prepare a student for the ANSI accredited TAB Technician certification test offered by the ITI.

• P2000 TABB Instructor's Manual
• P2001 TABB Student Textbook

This curriculum can be ordered through the ITI's web site or downloaded from the ITI Mobile application. The mobile application is available through Total Track (Windows version) or the Apple Store (iPad version).

This module is one book in the ITI Environmental Technician Module Series.

These training modules are designed for TAB and Service technicians and HVAC related fields. The modules presume that the reader has a basic knowledge of HVAC systems and TAB work and knows how to use the instruments commonly used in the field.

This particular module covers general design of VAV systems, airflow controls in VAV systems, types of VAV systems, types of VAV terminal units, supply air temperature controls, static pressure controls, air volume controls, building pressurization, system considerations, and benefits of VAV systems.

• P2200 Variable Air Volume Systems

This curriculum comes with an Instructor Guide and Student Manual and can be ordered through the ITI's web site.